motolight

The development of the charging system analyzer was preceded by several years of practical research into the operation of the components responsible for the power generation and power supply of motorcycles. Analysis of all-round faults, latent and explicit, led to the idea of ​​developing a device capable of finding one or another fault within a short time. Many craftsmen, having only a multimeter at hand and some knowledge in the field of electricity, are able, in most cases, only to replace a faulty unit. But this idea, later, turns out to be deceptive, since it is impossible to determine the reason for the exit of this or that node using only a multimeter!

In the process of designing the analyzer, original phase digital voltmeters were developed, capable of measuring with a sufficiently high accuracy voltage from 0 to 200 volts, moreover, simultaneously, at once on all phases of the generator. The device has its own autonomous power supply from the built-in battery, which allows it to be used in operation for a long time. Doesn't require any adjustments and settings. Easy to use, but requires basic knowledge of electrical and electronic engineering. All analyzer modules are manufactured in the Republic of Belarus! The stand has no analogues.

In the meantime, there is no need to worry about it. ”

The analyzer of the charging system “ML-ST003” is intended for diagnostics of power supply circuits and battery charging of motorcycles, ATVs and scooters with a three-phase or two-phase generator.

In the meantime, there is no need to worry about it. ”

The analyzer can perform the following types of diagnostics:

- voltage measurements at the battery terminals and other electrical circuits;

- measurement of charging current;

- measuring the charging voltage;

- synchronous voltage measurement on the generator phases without load;

- synchronous voltage measurement on the generator phases under load;

- diagnostics of a short circuit of the generator windings to ground;

- diagnostics of the turn-to-turn closure of the generator windings;

- diagnostics of "break" of the generator windings;

- "continuity" of electrical circuits for "open" (probe);

- active probe with voltage information output.

Designed for qualified service station specialists and service centers!

In the meantime, there is no need to worry about it. ”

Main technical characteristics:

1. Supply voltage - 12 V

2. Consumption current - 0.1 A

3. Working temperature - (-10 to +50 С)

4. Measurement range of phase voltages - 0-200 V

5. DC voltage measurement range - 0-40 V

6. Measurement range of direct current charging - 0-10 A

7. Threshold of lowering the supply voltage - 7.2 V

8. Charging current of the internal battery - 0.12 A

9. Overall dimensions - 155x140x56 mm

10. Weight - 910 g.